Setup and Connection info for Cipher Bluetooth Module for in-ears

Below are basic connection steps for the most common devices you might connect to.

Current instructions on pairing Bluetooth devices to Android can be found here.

How to connect to an Apple iPhone or iPad over Bluetooth

Press and hold the Center button on the BT controller for about 5 seconds to put it in pairing mode. In your iPhone, go to Settings > Bluetooth. You will see Audeze IEM under Other Devices. Select it and you should then be connected.

How to connect to Bluetooth on a Windows 10 Computer

First, open your Bluetooth and other devices under Settings:

1. Open Settings.
2. Click on Devices.
3. Click on Bluetooth & other devices.
4. Turn on the Bluetooth toggle switch.

5. Click the Add Bluetooth or other device button to connect a new device.

   

6. Select the Bluetooth option.

   

7. Press and hold the Center button on the BT controller for about 5 seconds to put it in pairing mode.

8. It might take a moment, but Audeze IEM will appear in the list, click it to connect.

   

9. Click the Connect button to pair.
10. Click the Done button.

How to connect to Bluetooth on MacOS Sierra

1. Press and hold the Center button on the BT controller for about 5 seconds to put it in pairing mode, and choose Audeze IEM from the Bluetooth status menu () in the menu bar, then choose Connect.

2. If the Bluetooth status menu isn’t in the menu bar, choose Apple menu > System Preferences, click Bluetooth, then select the “Show Bluetooth in menu bar” checkbox at the bottom of the window.

   Note: If you don’t see Bluetooth in System Preferences, your computer doesn’t support Bluetooth.

3. Follow the onscreen instructions to set up the device.

Select Audeze IEM as your computer’s input and/or output device:

1. Choose Apple menu > System Preferences, then click Sound.

2. To set up the headphone speakers as your output device, click Output. To set up the mic for sound input, click Input.

3. Select Audeze IEM as the device you want to use in the list of devices.

Here is some additional info about the LED indicators:

BLUE: lights when powered on, blinks occasionally while on

Flashing RED and BLUE: in pairing mode

RED: lights up while charging, turns off when charged; lights for 1 second before powering off

Attached is a PDF of the user guide as a reminder of the button functions.

If you have further questions, please email our support team at [e-mail].